Turbo Ethernet for PLC Oldie SIMATIC S5

S5-TCP/IP-100 is an Ethernet interface for the SIMATIC S5 from Siemens. With its 10 MBit/s and 100 MBit/s, the communication processor offers maximum-speed data transmission rates. It communicates with the SIMATIC S7 and SIMATIC S5 controllers of Siemens as well as with Modbus TCP interfaces from Schneider and Wago, among others.



  • Processing of TCP/IP, ISO on TCP (RFC1006) and Sinec H1 at the same time
  • Communication with SIMATIC S5 und SIMATIC S7 controllers via ISO on TCP (RFC1006).
  • Communication with controller from Schneider Group, Beckhoff, Wago and others via Modbus TCP
  • Transmission of raw data (send/receive communication)
  • Chance to acquire and visualize process data via OPC through pre-parameterized standard connections for layer 7 communication
  • Connection with PC or programming device either directly via serial interface or indirectly via bus path
  • Support of event-controlled data communication via Fetch on Event
  • Connection of additional field devices or setup of small local networks through integrated 4-port switch


  • High security standard of data transmission due to continuous connection monitoring
  • Optional password protection
  • Storage of configuration during power failure
  • Additional security features on CompactFlash card

Easy-to-Handle Diagnostics

  • Single connection diagnosis and overview of all connections
  • PLC interface diagnosis
  • Separate monitoring of standard connections and Fetch on Event connections
  • Network status, number of sent and received telegrams and evaluation of Indicator Word

Technical Details

Supported S5 ControllersSIMATIC S5-115, SIMATIC S5-135, SIMATIC S5-150, SIMATIC S5-155
PLC Interface1 x TTY, 15-pole Sub-D socket with slide-locking bolts
4-Port-Ethernet-SwitchRJ45, 10/100MBit/s, half/full-duplex, 10 BaseT/100 BaseTX, Auto-negotiation, link LED and activity LED per port
Supported ProtocolsTCP/IP, ISO on TCP (RFC1006), ISO (H1), Modbus TCP, PLC Header, DNS, DHCP, SNMP services in accordance with MIB II, FTP
Types of JobsSend Direct, Receive Direct, Fetch Active, Fetch Passive, Write Active, Write Passive, Fetch on Event
Compact Flash SlotType I or II (standard), for configuration backup, “Hot Plug” capability
Power Supply5 VDC via S5 backplane bus, maximum of 3 A
Operating / Storage temperature0 °C ... +60 °C / -20 °C ... +70 °C
Relative HumidityMaximum of 95 % at +25 °C
Required Space1 slot on SIMATIC S5-115, adapter capsule required
Module FormatDouble Europa
Configuration softwareNetCon S5 for Windows
CompatibilityCompatible to each other, so that existing parameterization can be taken over directly when a change is made


Get access to our Downloads

You need a MySofting account to be able to access our Downloads. Register here or log in if you already have one.

Order Numbers

200-4000-01S5-TCP/IP 100


Scope of Delivery

HardwareS5-TCP/IP 100, Ethernet interface for SIMATIC S5
SoftwareConfiguration Software NetCon S5
Documentationprinted quick reference, manual on CD-ROM


Additional Products and Services

700-1700-01PLC cable for S5-CP/PLC (short connection cable) for programming the SIMATIC S5 via Ethernet
700-1500-05EIA-232 / TTY converter cable for serial parameterization
700-2400-02CompactFlash Card, 128 MB
110-1000-01Training “Industrial Ethernet – Troubleshooting in Automation“, 3 days
100-1030-01Training “OPC Plug & Play in Automation”, 2 days Basics, OPC communication with S5/S7 controllers and OPC Client


  • Industrial Ethernet: Troubleshooting in Automation


CF Card

  • For additional Backup of the Parameterization
  • Hot Plug Capable
  • 128 MB


Order Number


RS232 / TTY cable

Cable for Serial Parameterization of the S5-TCP/IP 100

Technical Details

  • For Serial Parameterization
  • RS-232, 9pin D-sub Female – TTY (20 mA), 15pin D-sub Male
  • Length: 5 m

Order Number:



  • TTY, 15pin D-sub Male – TTY, 15pin D-sub Male
  • Length: 0,6 Meters

Order Number